AEPH
Home > Industry Science and Engineering > Vol. 3 No. 8 (ISE 2026) >
Vibration Characteristics Analysis of the Propeller Shaft in a Deep-Sea Thruster
DOI: https://doi.org/10.62381/I265805
Author(s)
Xiaoyu Zhao, Shengguo Liang, Kai Chen*
Affiliation(s)
Tianjin Hanhai Lanfan Marine Technology Co., Ltd., Tianjin, China *Corresponding Author
Abstract
To gain the vibration characteristics of the propeller shaft of a certain type of deep-sea thruster in an oil medium and to understand the effect of oil viscosity on the structural modes, the simulation models of the propeller shaft and the oil are established separately. In addition to the dry modal vibration characteristics calculation of the propeller shaft on the ANSYS Workbench platform, the wet modal vibration characteristics calculation of the propeller shaft under the influence of oil viscosity is also carried out by using the fluid-structure interaction method. Through analysis of the simulation results, it is concluded that the oil has an obvious suppression effect on the vibration of the propeller shaft. In addition, by changing the viscosity of the oil, various wet modal vibration characteristics are obtained. The analysis results indicate that the greater the viscosity of the oil, the more prominent the suppression effect of the oil on the vibration of the propeller shaft is. This provides an important reference for the follow-up structural design of the propeller shaft and the selection of the oil type.
Keywords
Deep-Sea Thruster; Modal Analysis; Natural Frequency; Fluid-Structure Interaction
References
[1] Yang Zhongchao, Lou Jingjun, Sun Jiong, et al. Research of vibration and acoustic traits of underwater vehicle's propeller-shaft-hull system. Ship Science and Technology, 2017, 39(12): 30-35. [2] Wang Lei, Xie Junchao, Zhou Ruiping. Analysis and research on whirling vibration characteristics of large ship propulsion shafting. Jiangsu Ship, 2010, 01(01): 14-17. [3] Zhang Kai, Yin Shaoping, Cao Xiaojuan, et al. Simplified Modeling and Vibration Analysis of Power and Propulsion System for Torpedo. Journal of Unmanned Undersea Systems, 2019, 02(02): 217-224. [4] Duan Yong, Liu Ruijie, Ma Lin. Application of metal rubber to the vibration control of torpedo propulsion shafting. Journal of Ship Mechanics, 2020, 09(09): 1187-1195. [5] Zhao Shuai, Chen Qian, Huang Zhiwei, Yao Bing. Research on reduction of multi-mode longitudinal vibration of hollow shafting. Journal of Vibration and Shock, 2016, 12(12): 96-101+109. [6] Zhao Yao, Zhang Ganbo, Li Liangwei. Review of Advances on Longitudinal Vibration of Ship Propulsion Shafting and Its Control Technology. Shipbuilding of China, 2011, 04(04): 259-269. [7] Lu Po, Zhao Yao, Li Liangwei, Zhang Ganbo. Research on the influence of improved design of propulsion shafting on hull acoustic radiation characteristics. Shipbuilding of China, 2012, 04(04): 37-45. [8] Dan Binbin, Li Gongyi, Zhou Ding, Rong Zhijun. Dynamic Property Analysis on Vibratory Shaft of Road Rollers Based on ANSYS. Machinery Design & Manufacture, 2012, 10(10): 193-195. [9] Tang Hengning, Chen Weitao, Du Bin. Finite element analysis of high-frequency vibrating shaft based on ANSYS. Construction Machinery and Equipment, 2017(05): 13-16+121. [10] Zhu Faxin, Lin Shaofen, Chen Yuepo. Modal analysis of marine diesel engine crankshaft. Ship Engineering, 2008(01): 23-25. [11] Wan Xinbin, Yang Wanying. Optimal design of a certain ship thruster system. Marine Power Plant, 2014, 04(06): 55-60. [12] Wang Linjun, Cao Huiping. Modal Analysis of Rotor Based on ANSYS-Workbench. Journal of China Three Gorges University (Natural Sciences), 2014, 12(06): 89-93. [13] Li Yongdong, Zhang Haiying, Ma Xiaolu, et al. Finite Element Analysis of Low-Noise Seawater Pump Based on ANSYS Workbench. Journal of Unmanned Undersea Systems, 2016, 6(03). [14] Liang Jianshu, Su Qiang, Li Xinye. Modal Analysis of Fluid-Structure Interaction Bellows Based on ANSYS/Workbench. Machinery Design & Manufacture, 2013(02): 91-93. [15] Shi Weidong, Guo Yanlei, Zhang Desheng, Meng Fanyou, Jiang Wenjun. Numerical simulation on modal of large submersible axial-flow pump rotor. Transactions of the Chinese Society of Agricultural Engineering, 2013, 12(24): 72-78. [16] Yang Jun, Wang Gangwei, Tian Jiabin, Liu Zhenglin. Study on vibration control of marine shaft. Journal of Vibration and Shock, 2020, 10(10): 24-31+91. [17] Zhao Wenlu. Analysis on Vibration Characteristics of Wet and Dry Modal of Turbine Runner. Water Conservancy Science and Technology and Economy, 2016, 08(08): 32-33+48. [18] Zhang Zhewei, Yu Yan, Liu Chuanfeng, Gong Ye. Modal analysis of eccentric shaft of vibrating feeder based on Ansys Workbench. Hoisting and Conveying Machinery, 2018(02): 127-129. [19] Peng Fei, Huang Yong, Li Zhun. Finite Element Analysis of Strength of Vibrating Screen Vibrator Shaft Based on ANSYS Workbench. Coal Mine Machinery, 2020, 03(03): 173-176. [20] Yang Yongfei, Li Wei, Shi Weidong, et al. Modal analysis of super low-specific-speed self-balancing multistage centrifugal pump rotor. Journal of Drainage and Irrigation Machinery Engineering, 2019, 37(7): 593-599. [21] Zhai Dalei, Chai Baoming, Zhang Junbao. Modal Analysis and Optimization of ZK Linear Vibrating Screen Based on ANSYS. Coal Mine Machinery, 2020, 03(03): 123-127. [22] Francesco Bucchi, Paola Forte. Simulation of the Vibratory Behavior of Slender Shafts Subject to Transverse Loads Moving in the Axial Direction. Shock and Vibration, 2020, 2905341, 10 [23] Deshui Xu, Jingtao Du, Chuan Tian, Toshiaki Natsuki. Vibration Characteristics and Power Flow Analyses of a Ship Propulsion Shafting System with General Support and Thrust Loading. Shock and Vibration, 2020 [24] Li Miaomiao, Li Zhuo, Ma Liangliang, Zhu Rupeng, Ma Xizhi. Influence of bearing arrangement on vibration characteristics of rotor shafting. Journal of Aerospace Power, 2019, 06(06): 1209-1216. [25] Yang Xiaolan. Finite element analysis of harmonic response of vibration motor shaft based on ANSYS. Mining & Processing Equipment, 2005, 06(06): 81-82. [26] Chen Yingkai. Finite Element Analysis of Drill of Earth Auger Based on ANSYS Workbench. Agricultural Equipment & Vehicle Engineering, 2017, 03(03): 68-70. [27] Xu Tangfu, Yan Jin, Luo Yangyang, Chen Dejin. Vibration Characteristics Analysis of Submarine Pipeline Based on ANSYS. Equipment Manufacturing Technology, 2019, 08(08): 24-29.
Copyright @ 2020-2035 Academic Education Publishing House All Rights Reserved